单室卧式真空回火炉 the single chamber horizontal vacuum tempering furnace· 产品分类：
· 产品名称：单室卧式真空回火炉（vacuum single chamber horizontal tempering furnace ）
应用范围：真空回火炉主要用于高速钢、高合金工模具钢、电工磁性材料、不锈钢等材料的光亮回火，也可以用于有色金属的再结晶退火及时效等。
产品特点：1、真空回火炉采用全金属屏结构，变形量少、热惯性小、适合低温回火使用、寿命长、易维护；
一、结构特点/structure features：
合盛隆真空回火炉加热室主要采用全金属屏结构，变形量少、热惯性小、适合低温回火使用、寿命长、易维护。采用镍带加热器、安装简便、故障率低。真空回火炉的炉内前后均有可活动的隔热门，加热时关闭，防止热量损失;冷却时开启，构成高压气流通道，加快冷却速度。带有对流加热装置和快速冷却装置，升温时可充入惰性气体，开启对流加热装置，以实现低温段均匀对流加热，提高工作效率。快速冷却系统可有效控制工件变形量，加速工件冷却。电控系统采用plc与可编程温度控制器的方式，实现全自动、半自动、手动三种控制方式，确保真空回火炉的操作灵活。
he sheng long vacuum tempering furnace heating chamber mainly adopts full metal structure, less deformation, thermal inertia small, suitable for low temperature tempering, long service life, easy to maintain. using nickel belt heater, installation is simple, low failure rate. before and after the furnace has movable hot insulation, heating closed and prevent heat loss; cooling when open, a high pressure air flow channel, to speed up the cooling. and rapid cooling device with convection heating equipment, heating up the inert gas, open the convection heating device, in order to realize the low temperature section of uniform convection heating, improve the work efficiency. rapid cooling system can effectively control the deformation of workpiece, accelerate the workpiece cooling. electric control system adopts plc and programmable temperature controller, realize fully automatic, semi-automatic and manual control of three ways, flexible operation.
二、用途/application：
合盛隆真空回火炉主要用于高速钢、高合金工模具钢、电工磁性材料、不锈钢等材料的光亮回火，也可以用于有色金属的再结晶退火及时效等。
he sheng long vacuum tempering furnace mainly used for high speed steel and high alloy molds, electrical and magnetic materials, the material such as stainless steel bright temper, can also be used in non-ferrous metal re-crystallization annealing and aging, etc.
三、技术参数/technical parameters：
最高温度/the highest temperature
750℃
控温精度/temperature control accuracy
±1℃
炉温均匀性/uniformity of furnace temperature
满载15点400℃±8℃,满载15点600℃±5℃/full 15 point 400 ℃ + 8 ℃,full 15 point 600 ℃ + ±5 ℃
极限真空/ultimate vacuum
6.6×10^3pa（选择高真空时为6.7×10^3pa）/6.6×10^3pa（choosing a high vacuum6.7×10^3pa）
压升率/pressure rise rate
0.5pa／h
气冷压力/air pressure
6bar
四、设备选型/equipment selection
1、尺寸规格/size specifications
型号/model
有效工作尺寸/effective work size
装炉量/furnace capacity
加热功率/heating power
hzr-433
450 mm x300 mm x300 mm
100 kg
24kw
hzr-644
600 mm x400 mm x400 mm
200 kg
40kw
hzr-755
700 mm x500 mm x500 mm
300 kg
50kw
hzr-966
900 mm x600 mm x600 mm
500 kg
80kw
hzr-1288
1200 mm x800 mm x800 mm
1000 kg
100kw
hzr-1299
1300 mm x900 mm x900 mm
1200 kg
125kw
2、炉胆规格/furnace type specification
a
圆形金属炉胆。/round metal furnace
b
圆形石墨炉胆。/round graphite furnace
c
方向金属炉胆。/direction metal graphite furnace, furnace
d
方向石墨炉胆，标准配置为圆形石墨炉胆(2层硬毡+3层软毡)。/direction standard configuration for circular graphite furnace (2 hard blanket + 3 layer soft mats)
3、对流搅拌: y(加对流风机)、n(不加热对流风机)。标准配置为n。4/5/6/7/8项选型参数同退火炉相同。
convection heating y (plus convection fan), n (not heat convection fan)；standard configuration is n；4/5/6/7/8 item selection parameters with the same annealing furnace
合盛隆机电设备(深圳)有限公司
13924589392
中国 东莞